We've uncovered this article about What Would Cause My Electric Water Heater to Stop Working? down the page on the web and reckoned it made perfect sense to talk about it with you on my blog.
Lots of modern residences make use of an electrical water heater for their heater, due to its benefit and also ease of use. Nevertheless, just like any other electrical devices, problems might arise with its use, unexpectedly. It can be really irritating to wake up to a chilly shower as opposed to a hot one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the instance may be, hot water heater problems can be rather aggravating. Fortunately, we have actually made a checklist of possible options to your hot water heater issues. There are a number of variables that could trigger most of these issues, maybe an issue with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you shut off the major power supply for safety. Whatever the problem is, getting it taken care of need to not pose excessive of a concern if you adhere to these steps:
Inspect Your Power Supply:
As fundamental as this might seem, it is very needed. Without ample power, your hot water heater will not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power problem. Check if the fuse is blown out or the breaker stumbled. If the breaker is the concern, just transform it on and off again. Replace any damaged or damaged fuse. Examine the device with power after these changes to see if it's now working.
Check the Heating Element in the Hot Water Heater:
If it's not a power issue, after that attempt looking into your burner if it is still functioning. Test each of your heating elements to be sure the problem isn't with any of them. If any of them is defective, replace that part and after that examine whether the warm water is back on.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to examine the temperature level setups on your top thermostat. Make sure the breaker is turned off before doing anything. Open the gain access to panel and press the red button for temperature reset above the thermostat. This should aid warm the water. Transform the breaker back on as well as inspect if the issue has been dealt with.
Call A Professional:
If after changing all damaged components as well as resetting your temperature, the hot water heater still isn't functioning, you might need to call a specialist plumber for a professional point of view. The problem with your heating system could be that the cold and hot faucets have been changed or it may be undersized for the amount of hot water required in your house. Whatever the case might be, an expert plumber would help solve the trouble.
Verdict
Water heater problems are not constantly major. A number of them are due to minor concerns like a blown fuse or damaged heating element. Replacing the malfunctioning parts need to do the trick. Nonetheless, if you are still not able to solve the issue, give a call to your nearest plumber to find to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a keen reader about How to Troubleshoot and Repair an Electric Water Heater, I was thinking sharing that piece of content was sensible. Do you know about someone else who is sincerely interested in the subject? Please feel free to share it. Thank you for your time. Visit us again soon.
Schedule Appointment